Replacement Zebra Strip

Replacement Zebra Strip (connector) for OG Classic Pebble and Pebble Steel.  One long strip will repair screen tearing on 3 watches.  One short one will fix one watch.

• Short strip measures 16.7mm long x 4mm high x 2mm thick (this is 1/3 of a long strip)
• Long strip measures 50mm long x 4mm high x 2mm thick.

For comparison, the original zebra strip in the watches (blue in the picture next to a long strip) measure 15mm x 3.6mm x 1.5mm.

There are guides online on how to replace the strip, which is done at your own risk.  You will need a sharp craft knife/exacto knife or similar to cut down the strip to size.  You might need to trim the height as well as the length.